The code Error 43 is probably one of the frustrating and “generic”error code reported by Windows computer. Generic refers to the fact that Windows is basically telling you that a hardware device on your computer system is not working. This error code can be appeared any time when Windows doesn’t recognize a device whether its a Video Card, Hard drive, USB port or other piece of hardware that is connected to your PC. Basically you will find an error message like this:
“Error Code 43: Windows has stopped this device because it has reported problems”
What are the causes of Error 34?
About 95% of the time, resolve error code 43 means that a device driver is either corrupted, outdated, missing or the hardware is corrupted and require to be changed. The device drivers can become corrupt or damage over time, and most users will eventually experience a driver error. Adding or removing software and hardware can cause conflicts in the registry and can changed the driver communication.
Sometimes, temporarily you can bypass the error just by disconnect the device from the motherboard and re-connect it, ejecting the power cable from the power supply and reboot your system after a few minutes, etc. However, theses tips are temporary and will not fix the actual troubles.
How To Fix Error Code 43 Messages?
At first you must makes sure that your device driver is up to date. Here, I have provided two methods to accomplish this below:
Method 1: Update your device drivers automatically (the easy way)
If your are not technically sound and unable to locate the correct device drivers from your computer manufacturer, then go through the process of removing and re-installing of your drivers manually, then you should run a free scan with a recommended driver tool. This software automatically locate the match driver and download it. It’s safe and can saves your lot of time keeping your computer updated.
Method 2: Manually update your drivers
If you have good technical skills and feel confident making changes to your computer, then follow the steps below:
Step 1: Uninstall the current driver:
First, you need to uninstall the current driver…
Tap on “Start >> Run” and type “sysdm.cpl” in the text box and press enter key
Open the “Hardware” tab on the System Properties dialog box, then tap on“Device Manager”
Double click “Device Type”, then click on the hardware device that is reporting Error 43
Next, go to the “Driver” tab and click “Uninstall” to uninstall the device driver completely
Step 2: Locate the correct/matched driver:
After uninstalling the driver, visit the manufacturers website and find the newest driver for your device. You can usually get the latest driver under the technical support or driver section of the company’s website.
Step 3: Download the driver:
Download the driver, most likely the driver will be in compressed .ZIP file, or an executable file (.EXE).
Step 4: Install the new driver on your PC:
Extract the .ZIP file or double-click the .EXE and install the driver.
Step 5: Reboot your computer:
One you done with the steps, it should fix the communication problem between Windows and your hardware device, eliminating the error 43 message. If you continue getting the problems then most likely the device itself is damaged and needs to be replaced immediately.
No comments:
Post a Comment